Cylinders Labeling Machinery

Hot Melt Glue Labeling Machine

Description:
TP-LBM-S3 is the combination of the operating experiences on old model and the advanced German technology. It is applicable to paper labels cylindrical containers with small amount but multiform size.

When the size of containers and labels are changed, parts changeover is not necessary. After a few minutes' adjustment the machine will come into working condition.
The operator should only put and take off bottles from the machine. While the labels are fed, aligned and applied automatically.
Hot-melt glue is used. To guarantee a constant viscosity of hot-melt, the temperature is controlled by an electric thermostat.

Features
1, the replacement bottle and labeling is particularly simple, do not change any parts, five minutes to complete. Through a simple one-button setup, making the equipment easy to achieve full glue and glue to switch between the two ends (label can be the entire surface coating can also choose to take only the mouth gummed label, saving glue costs).

2, the operator simply label batches into standard libraries, photoelectric detection, to take label, gluing, labeling within one second by the machine automatically.

3, built-in automatic temperature control device, so that the glue remains constant. SCR automatic voltage regulator, so that the glue temperature more accurately and save electricity by 50%.

4, the film thickness is 0.05MM-0.15MM can be adjusted between. Precise adjustment mechanism is conducive to saving hot melt glue usage.

5, the improved three-roll into a round labeling, labels more closely attached to the tank, labeling more beautiful smooth, soft even large diameter thin-walled tank can also be good for continuous labeling.

6, the vacuum suction cups at each front labels when labeling standard paper for the second pre-standard, to ensure there are no double cards.