CE Approvement GMP Model Mixing Machine with Ribbon

Negotiable 1 Set (MOQ)
Min. Order:
1 Set
Production Capacity:
10sets
Transport Package:
Seaworthy Plywood Cartons
Payment Terms:
L/C, T/T

Last Login Date:

May 28, 2015

Business Type:

Manufacturer/Factory, Trading Company

Main Products:

Packing Machine, Packaging Machine, Filling Machine, Filler, Labeling Machine, Capping Machine, Mixing Machine, Mixer, Grinding Machine, Food Machine

Find Similar Products

Product Description

Company Info

Basic Info.

Model NO.
TDPM
Additional Capabilities
Adding Other Material
Application
Powder, Granules
Application Area
Agricultural Chemicals
Certification
CE, ISO, CE, GMP
Condition
New
Mixing Drum Shape
Circular Groove
Stirring Type
Spiral
Working
Convection Mixer
Machine Material
Sustainless 304
Whole Structure
Single Shafe with Dual Spirals
Promient Advantage
No Leakage and No Dead Angle
Main Characteristic
Convection Mixing in Fast Speed
Other Optional Choice
Addtional Layer for Heating and Colling
Total Demension
1500*970*1655mm
Layout Type
Horizontal
Mixer Type
Powder Mixer
Operating type
Continuous Operating
Trademark
Shanghai Topspack
Specification
CE SGS and GMP
Origin
Shanghai China
HS Code
84223030

Product Description

TDPM Series Horizontal Ribbon Mixer
I. General description
The Horizontal Ribbon Mixer contains three main parts: U-shape tank, auger and driving parts, with pretty high effect in mixing. The auger is dual structure, outer spiral make the material move from the sides to the center of the tank and the inner screw convey the material from the center to the sides, which is helpful to get convective mixing. Our TDMP Series Ribbon blender apply for different material: Powder, patch or granular which are accompany with little sticky or cohesive in its composition. This type of machine can also add another small amount of liquid and paste material into powder and granular, besides that, the lid of the tank can be made as open in order to easily cleanup or change parts.

II. Characteristics
1. With horizontal U-shape tank, a single shaft with two ribbons in symmetric
Distribution. At the top of tank lid, there is an entrance for material, of course we can
Meet the requirements with equipping the device of spraying or adding liquid.

No material deposit and without dead angle when mixing. There is a flap dome valve(pneumatic or manual controller)of the center at the bottom of the tank. The design of the valve is in an arc which assures no material to deposit or exists any dead angle when mixing. With tight interlock and reliable seal, it helps to keep from leaking any material under the circumstance of frequent switch on or off.

Durable&Safety: All material are made of Stainless Steel 304. Considering its high quality, these series machine are successfully awarded with CE certification.

Optional choice: This type of machine can also be designed to function as cooling or heating. Adding a layer outside the tank to forming into a U-shape hollow interlayer, among which we can put into some particular medium to gain the effect of cooling or heating, usually, injecting cooling water or heated steam, and in some case, it can also use electrical machine for heating.

III. Main Technical parameters( as the following sheet)

Model: TDMP200 TDMP300 TDMP500 TDMP1000 TDMP1500 TDMP2000
Effective Volumn: 200L, 300L, 500L, 1000L, 1500L, 2000L,
Fully Volumn: 280L, 420L, 710L, 1420L, 1800L, 2400L,
Send your message to this supplier
Ms. Wendy Tian

Post a Sourcing Request Now

People who liked this also liked